20-0-6 Arbor Liquid Fertilizer
50% Slow Release With Humates and Minor Elements
Total Nitrogen (N) 20.0%
10% Slowly Available Methylene Urea Nitrogen
10% Urea Nitrogen
Water soluble Potash (K204) 6.0%
Iron (Fe) 0.10%
Manganese (Mn) 0.05%
(Water Soluble Mn)
Zinc (Zn) 0.05%
Humates at 1% per total weight
Nutrients derived from: Methylene urea, Urea, Potassium Carbonate, FeEdta, Manganese Edta, Zinc Edta.
KEEP FROM FREEZING
A true concentrated liquid for easy mixing & application. For root injection, soil drench, or foliar spray application. This solution has a low salt index and is compatible with fungicides & pesticides.
1.25 gallons (1/2 jug) 100 gallons
2.5 gallons (1 jug) 200 gallons
5 gallons (2 jugs) 400 gallons
90% of the fine feeder roots are in the top two feet of soil, with most of those in the top eight inches. Start your application approximately 2 to 4 feet from the root flare and extend to beyond the drip line. The soil should be inoculated with a root probe going 4 to 6 inches deep from a power rig set at approximately 150 to 200 psi, depending upon the porosity or density of the soil. The root area of the tree should be injected in a grid or in concentric circles spacing 3 feet apart. Inject approximately ½ gallon of solution per injection site. Based on the 3 feet spacing this should put around 150 gallons. Site and soil conditions vary, so adjust your application accordingly. Shake before using.